Hopper
Evolution Hopper
Evolution Hopper can be used for 95% of coins and tokens worldwide, without needing adjustments.
Based on a belt drive, Evolution Hopper is the result of an entirely new design, which represents a decisive improvement in terms of both performance and ease of maintenance. The combination of extremely wear-resistant plastic resins with state-of-the-art electronics has produced a device with low purchase and management costs.
This type of hopper can be used for 95% of coins and tokens worldwide, without needing adjustments. Evolution Hopper is completely interchangeable with the other models available on the market. Suitable for many applications including Vending, Parking, Retail, and Amusement.
- High dispensing speed and reliability
- The standard version can be easily transformed into the adjoining version by simply removing the cover, which is fastened by two screws, and moving the connector to the new position
- Excellent security and diagnostics management
- Minimal maintenance - payout sensor easily accesible for maintenance
- Easy maintenance - board easily extractable from the outside
- DC motor, driven by an electronic actuator, which reduces friction and noise
- Equipped with a built-in agitator to prevent coin jams, as well as with additional electronic anti-jam electronics
- Interfaces: standard, parallel or ccTalk serial. The latter guarantees excellent security and diagnostics management
- High quality materials for long trouble-free operations
| Dimensions (L x H x W) |
126 x 286 x 226 mm |
| Weight | 2,5 Kg |
| Power supply | 20 ÷ 24 Vdc ± 10 % |
| Current consumption | 40 mA in stand-by – 2.5A during dispensing |
| Power consumption | 0.8 W in stand-by – 50 W during dispensing |
| Operating temperature | 0 °C ÷ 60 °C – relative humidity 5 ÷ 95% |
| Coins accepted | Ø 16 ÷ 30 mm – thickness 1.25 – 3.5 mm |
| Payout speed | 4 – 5 coins per second |
Capacity: approx. 1500 coins (1€)